Contrôle de qualité et inspection

Inserción de asas

Thanks to its long experience in leak control, AND&OR can offer a wide range of equipment, for both blow molding and bottling production lines.

Our models process from 1,000 up to 48,000 bottles per hours (bph) controlling containers from 150 ml to 20 L.

Due to the great versatility of the equipment and its automatic calibration, AND&OR systems are today a reference in the market.

Testeuses de fuites sur bouteilles vides:

The linear leak testers are arranged in line over container’s conveyor can. They can be fitted with one or more heads, fixed or mobile, depending on the production required and bottle size.

Optionally weight control or camera vision systems are integrated in the leak tester machine.

Up to… Bottle Per Hour (BPH) 1000 2000 3000 4000 6000
Linear without structure LS1K LS5K LS8K
Linear with fix heads LS1E LS2E LS4E LS6E LS8E
Linear with mobile heads LS1-C1 LS2-C1C2

* Production reference for 1L bottle – To check other volumes, please contact AND&OR.

The rotary leak testers are generally set up in high production lines. Its simple, strong and high electronic technology design, make it very trustworthy, sensitive and precise, allowing productions rate up to 48,000 bph.

The quality of the final product improves, and the return and damage are reduced to a minimum.

  • Camera vision systems
  • Simulation of leak for an automatic machine self-checking
  • Statistics download in USB memory
Up to… Bottle Per Hour (BPH) 8000 12000 16000 24000 32000 48000
Rotary leak testers LS8R LS12R LS16R LS24R LS32R LS48R

* Production reference for 1L bottle – To check other volumes, please contact AND&OR.

Up to… Bottle Per Hour (BPH) 8000 12000 16000 24000 32000 48000
Rotary leak testers LS8R LS12R LS16R LS24R LS32R LS48R

* Production reference for 1L bottle – To check other volumes, please contact AND&OR.

Testeuses de fuites sur bouteilles pleines:

LT1

This system operating principle is based on the pressure gradient calculation measured laterally to the passage of the bottle through the unit.

  • Defects detection in cap, or incorrect capping

  • Bottle leak detection, in the cap area

Contrôle de fuites sur bouteilles fermées

:

VLS-R

This system makes leak control on closed bottles through vacuum decay test.
Product closure inside a hermetically sealed chamber on which the vacuum is created.

Capacities:

  • CHECK finishing, water tightness, resistance.

  • NOTICE for defective bottles continuity.

  • SELECT defective bottles for leakage, micro leakage.

  • VISUALIZE checking data and production.

Systèmes de vision artificielle

VA

360º artificial vision system guarantee the defects detection in plastic bottles, taps, handles and others.

The strictly studied optical design guarantees an optimum image quality with high quality and strength components, in an industrial environment condition, high speeds, and variable lighting and temperature conditions.

  • Flexible application
  • Easy configuration
  • Up to 6 inspection tools
  • Different defects types.
  • Inspection of various specific areas of bottles.

The artificial vision system can be integrated in leak testers, both linear and rotary.

CIRCULARITY

BLACK DOTS

NECK FLASH

INSIDE FLASH

BREAKS

LACK OF MATERIAL

BLACK DOTS

OVALIZATION

HORIZONTAL FLASH

VERTICAL FLASH

artificial vision for bottle defects detection

Contrôle de fuites et fissures sur bidons de 5 gallons

:

LS-GI

In case of large returnable containers (PET, PC), the machine is usually installed at the beginning of the line, after uncapping and previous washing.

Contrôle de poids sur boîtes:

CPL1

AND&OR box weight tester is appropriate to be installed at the end of the filling line, after the wrap-around machine or box packer.

It detects if there is any bottle missing inside the packed box, as well as if there is liquid missing in any bottle.

Why choosing our system?

  • Fully automatic system
  • Short payback

  • Improve the final product quality 

  • Easy adaptable to existing line

  • Quick change over

  • Automatic calibration system patented by AND&OR

Why choosing And&Or?

  • More than 34 years of experience

  • Customized projects adapted to your needs

  • Installations, partners, agents and references worldwide

  • After sales service guarantee

These systems can be equipped with extra control features:

  • Camera vision systems

  • Simulation of leak for an automatic machine self-checking.

  • Statistics download in USB memory. 

QULITY CONTROL MACHINES

Linear leak Tester, without structure. Production rate: 1,000 BPH

LS1K

Leak tester LS1K performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.

This leak tester, with 1 fix head, allows keeping an adequate test time, guaranteeing sensibilities of 0.1mm diameter hole.

Maximum production rate: 1,000 BPH

*Production reference for 1L bottle. To check other volumes/speeds, please contact AND&OR.

DOWNLOAD

Linear leak Tester, with fix head. Production rate: 1,000 BPH

LS1E

Leak tester LS1E performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.
This leak tester, with 1 fix head, allows keeping an adequate test time, guaranteeing sensibilities of 0.1mm diameter hole.

Maximum production rate: 1,000 BPH

*Production reference for 1L bottle. To check other volumes/speeds, please contact AND&OR.

DOWNLOAD
VIDEO

Linear leak Tester, with fix heads. Production rate: 2,000 BPH

LS2E
Leak tester LS2E performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.

This leak tester, with 2 fix heads, allows keeping an adequate test time, guaranteeing sensibilities of 0.1mm diameter hole.

Maximum production rate: 2,000 BPH

*Production reference for 1L bottle. To check other volumes/speeds, please contact AND&OR.

DOWNLOAD
VIDEO

Linear leak Tester, with fix heads. Production rate: 3,000 BPH

LS4E
Leak tester LS4E performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.

This leak tester, with 4 fix heads, allows keeping an adequate test time, guaranteeing sensibilities of 0.1mm diameter hole.

Maximum production rate: 3,000 BPH

*Production reference for 1L bottle. To check other volumes/speeds, please contact AND&OR.

DOWNLOAD
VIDEO

Linear leak Tester, with fix heads. Production rate: 4,000 BPH

LS6E
Leak tester LS6E performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.
This leak tester, with 6 fix heads, allows keeping an adequate test time, guaranteeing sensibilities of 0.1mm diameter hole.

Maximum production rate: 4,000 BPH

*Production reference for 1L bottle. To check other volumes/speeds, please contact AND&OR.

DOWNLOAD
VIDEO

Linear leak Tester, with fix heads. Production rate: 6,000 BPH

LS8E
Leak tester LS8E performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.
This leak tester, with 8 fix heads, allows keeping an adequate test time, guaranteeing sensibilities of 0.1mm diameter hole.

Maximum production rate: 6,000 BPH

*Production reference for 1L bottle. To check other volumes/speeds, please contact AND&OR.

DOWNLOAD

Linear leak Tester, with mobile heads. Production rate: 2,500 BPH

LS1-C1

Leak tester LS1-C1 performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.
This leak tester, with 1mobile head, allows keeping an adequate test time, guaranteeing sensibilities of 0.1mm diameter hole. It is recommended to be used in lines where bottles cannot be accumulated over the conveyor.

Maximum production rate: 2,500 BPH

*Production reference for 1L bottle. To check other volumes/speeds, please contact AND&OR.

VIDEO

Linear leak Tester, with mobile heads Production rate: 4,000 BPH

LS2-C2

Leak tester LS1-C1C2performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.
This leak tester, with 2mobile heads, allows keeping an adequate test time, guaranteeing sensibilities of 0.1mm diameter hole. It is recommended to be used in lines where bottles cannot be accumulated over the conveyor.

Maximum production rate: 4,000 BPH

*Production reference for 1L bottle. To check other volumes/speeds, please contact AND&OR.

VIDEO

Rotary leak Tester, Production rate: 8,000 BPH

LSR8
Leak tester LSR8performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.

This leak tester, with 8 heads, allows keeping an adequate test time even at high speeds, guaranteeing sensibilities of 0.1mm diameter hole.

Maximum production rate: 8,000 BPH

*Production reference for 1L bottle. To check other volumes/speeds, please contact AND&OR.

VIDEO

Rotary leak Tester, Production rate: 12,000 BPH

LSR12
Leak tester LSR12 performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.

This leak tester, with 12 heads, allows keeping an adequate test time even at high speeds, guaranteeing sensibilities of 0.1mm diameter hole.

Maximum production rate: 12,000 BPH

*Production reference for 1L bottle. To check other volumes/speeds, please contact AND&OR.

DOWNLOAD

Rotary leak Tester, Production rate: 16,000 BPH

LSR16

Leak tester LSR16 performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.

This leak tester, with 16 heads, allows keeping an adequate test time even at high speeds, guaranteeing sensibilities of 0.1mm diameter hole.

Maximum production rate: 16,000 BPH

*Production reference for 1L bottle. To check other volumes/speeds, please contact AND&OR.

DOWNLOAD
VIDEO

Rotary leak Tester, Production rate: 24,000 BPH

LSR24
Leak tester LSR24 performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.

This leak tester, with 24 heads, allows keeping an adequate test time even at high speeds, guaranteeing sensibilities of 0.1mm diameter hole.

Maximum production rate: 24,000 BPH

*Production reference for 1L bottle. To check other volumes/speeds, please contact AND&OR.

DOWNLOAD
VIDEO

Rotary leak Tester, Production rate: 32,000 BPH

LSR32
Leak tester LSR32performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.

This leak tester, with 32 heads, allows keeping an adequate test time even at high speeds, guaranteeing sensibilities of 0.1mm diameter hole.

Maximum production rate: 32,000 BPH

*Production reference for 1L bottle. To check other volumes/speeds, please contact AND&OR.

DOWNLOAD

Rotary leak Tester, Production rate: 48,000 BPH

LSR48

Leak tester LSR48 performs the control of plastic bottle’s leakages and avoids sending bottles with pinholes to the filling line. It is appropriate to be installed after the blower in blow molding lines, or before the filler in case of filling lines.

This leak tester, with 48 heads, allows keeping an adequate test time even at high speeds, guaranteeing sensibilities of 0.1mm diameter hole.

Maximum production rate: 55,000 BPH

*Production reference variable depending on bottle format. To check other volumes/speeds, please contact AND&OR.

DOWNLOAD

Cap closing control

LT1

LEER MÁS
VIDEO

Box weight tester

CPL1
Box weight tester 40CPL1-I detects if any bottles is missing inside a box.

It is appropriate to be installed in the packaging line after the wrap around/box maker machine. It has an electronic system based on a microprocessor and its versatility allows changing the production rate and modifying the weighting parameters.
(Capacity, division, etc.).

DOWNLOAD

Leak tester for closed bottles

VLS-R

Our system VLS-R makes leak control on closed bottles/packaging through pressure decay test.

Its simple, strong and high technology design make it highly reliable, sensitive and precise for productions from 6.000 until 24.000 bph (depending on model and headstock numbers of rotary system).

It is an automatic rotary machine, with electronic equipment based on micro-processor AND&OR. The test is made in a bell closing hermetically, inside there are the closed bottles (full or empty), then the emptiness is made, and the evolution of pressure is calculated during a given period of time. Rejecting the bottles/packaging with a leakage at its output.

DOWNLOAD
VIDEO

Leak and crack testers for 5 gallons containers

LSE-GI

Leak tester LS2E-GI performs the control of 5 Gallons plastic bottles leakages and cracks, and avoids sending bottles with holes to the filling line. It is appropriate to be installed at the beginning of the filling line, after uncapping and previous washing. 

Production rate: from 1,000 to 2,500BPH

Available with 2, 4, 6 or 8 headstocks

Leak and weight tester

LWS

Leak and weight tester LSW is based on a combination of linear leak and linear weight machine. Its microprocessor technology provides a wide range of functions, such as: weighting bottles and detecting micro-leaks at desired sensitivity. The system is fully automatic, simplifying its use and maintenance.

Maximum production rate: depending on model/bottle

DOWNLOAD

360º artificial vision system

VA

360º artificial vision system guarantee plastic bottles, taps, plastic handles and other defects detection.

It detects, among others:

  • Circularity
  • Black dots
  • Breaks
  • Inside/neck flashes
  • Horizontal/vertical flashes
  • Lack of material  

The strictly studied optical design guarantees an optimum image quality with high quality and strength components, in an industrial environment condition, high speeds, and variable lighting and temperature conditions

  • Flexible application
  • Easy configuration
  • Up to 6 inspection tools
  • Different defects types.
  • Inspection of various specific areas of bottles.

Downloadable content

The content is restricted, in order to have access it is necessary to register

Formulaire d’inscription

En And&Or (titularidad de And&Or, S.L.U.) trataremos los datos que nos facilites con la finalidad de registrarte un usuario en la web. Podrás ejercer los derechos de acceso, rectificación, limitación, oposición, portabilidad, o retirar el consentimiento enviando un email a dpd@andyor.com. También puedes solicitar la tutela de derechos ante la Autoridad de Control (AEPD). Puedes consultar información adicional y detallada sobre protección de datos en nuestra Política de Privacidad.

Login

Contact

    Chez And & Or (propriété de And & Or, S.L.U.), nous traiterons les données que vous nous fournissez dans le but de vous envoyer des informations relatives à votre demande concernant nos produits et services. Vous pouvez exercer les droits d'accès, de rectification, de limitation, d'opposition, de portabilité ou de retrait du consentement en envoyant un e-mail à dpd@andyor.com. Vous pouvez également demander la protection des droits auprès de l'Autorité de Contrôle (AEPD). Vous pouvez consulter des informations supplémentaires et détaillées sur la protection des données dans notre politique de confidentialité .

    Je suis d'accord avec la politique de confidentialité

    CONTACT US